Blunders to Avoid When Painting Kitchen Cabinets
Painted cabinets are the new swag and as such, happens to rule as updating of the kitchen with a few additional color coats is an idea people love. No second thoughts happen to cross people’s mind as about this particular perception, but little do they comprehend the pitfalls associated with it. Some most common blunders to avoid in this particular undertaking include:
Having unrealistic expectations.
The lovely nature of the cabinets is a good result, but the smooth nature they portray is not going to be obvious especially if the cabinets happen to have an open grain. The paint will not cover the grooves on the cabinets and hence the rough aspect of the cabinets. Another thing is that stains on the cabinet surfaces become more evident and visible in after the new paint coat dries. Putty is the right material to fill the grains, and this can be a very long and labor-intensive process.
- Allocating insufficient time.
It is a common belief that the application of a new coat of paint is an activity done over the weekend and completed successfully. Well, this a misplaced opinion as the whole business can take at least four days and stretch to even a week of the event as the prep time for the job also plays a significant role in the whole paint application job.
- Non-removal of the drawers and doors off.
A very crucial step in the cabinet printing job. Remove all the hardware such as the hinges and knobs. Pull out the drawers then take off the doors. Mistakes begin to happen the moment people tend to associate painting everything on the cabinet with time saving. However, it is not an ideal idea as the cabinet hardware is likely to wear very soon and start chipping.
- Non-identification of where the hardware, drawers and doors go.
After removing the hardware bits, it is evident that you need to glue back the parts to the original positions. Non-identification and marking of where each primary tool was to go may be disastrous in case one forgets. A tape with number label can help solve the problem.
- Skipping of sanding.
No matter the condition of the cabinet surfaces, sanding is still an essential process in the cabinet repainting idea, because it helps in the creation of surfaces to which paint can easily stick. A middle-spectrum sandpaper is the best option for this kind of sanding.
- Dust filled surface before painting.
Dust on the cabinet surface creates an impression of one who has painted over sand and this lead to a rough finish. The correction of such an error involves sanding down all over again and then repainting. For you to avoid such, it is necessary to vacuum any dirt and debris before engaging in the actual painting process.
- Non-priming.
It is easy to overlook and skip this particular step, but the consequences are not very pleasant as it leads to almost immediate bleeding of the paint from knots in the wood. The immediate result is a fantastic kitchen, but it does not last long. When using a primer, the stain blocking primer is the best option as blotches are not likely to occur in the curing process of the paint.
- Choosing the wrong color
It is hard to point out that particular colors are right for the kitchen. Getting it right the first time for the cabinet though is crucial because the color choice is not appealing as originally thought. Testing the color type on paper and hanging it strategically in the kitchen location to see whether it matches is a good idea before actually considering the color.
- Cheap paint.
A good paint guarantees a smoother finish. Moreover, going for the best paint can be cost effective especially in the part that involves hiring a professional to do the job. It is easier to do the job alone instead of hiring one.
Brush marks at the end of the task should not be a headache as the spray gun, or a smoothing roller can quickly help solve that particular one.
